Countermeasures Against Call For Service Message - Kyocera Mita KM-P4845w Operation Manual

CHAPTER 6 TROUBLESHOOTING

4. Countermeasures against Call for service Message

When a service call message such as the following is displayed and
the Attention indicator on the operation panel is lit, the printer has
detected a malfunction. Stop use of the printer and perform the
following procedure.
Inch specifications
Metric specifications
1
Pull the main body release lever to open and then close the
printer body.
If the same message remains, make a note of the displayed
2
error code (C xxxx in the example above).
3 Turn the main switch off (
cord.
4 Contact your service representative and report the error code
above.
6-6
) and disconnect the power