Kyocera Mita KM-P4845w Operation Manual page 21

Press the N or M key to select "2. Set printer".
5
Inch specifications
Metric specifications
Press the Enter key.
6
7 Press the N or M key to select "3. DHCP server".
Inch specifications
Metric specifications
8 Press the Enter key.
9 The selected item will flash. Press the N or M key to select
"OFF".
Inch specifications
Metric specifications
10 Press the Enter key.
11 Press the N or M key to select "4. IP address".
Inch specifications
Metric specifications
12 Press the Enter key.
CHAPTER 3 GETTING READY FOR PRINTING
Use the MNOP cursor keys to input the IP address.
13
Inch specifications
Metric specifications
In order to set the IP address to "192.168.0.1", perform the
following procedure.
1
Press the N or M key to display "192".
Inch specifications
Metric specifications
2
Press the P key. The next value will flash.
Inch specifications
Metric specifications
3
Press the N or M key to display "168".
Inch specifications
Metric specifications
4
Press the P key. The next value will flash.
Inch specifications
Metric specifications
3-3