Table of Contents
Advertisement
SPECIFICATIONS
Camera:
Scanning system
Interlace
Image device
Picture elements
Effective picture elements
Synchronizing system
Resolution
Video output level
Video S/N ratio
Minimum required
illumination
(incandescent lighting)
Backlight compensation
Iris function
Electronic iris range
Electronic shutter
Flange-back
White balance
Lens mount
17
English
: PAL standard
(625 TV lines, 25 frames/sec.)
: PLL 2:1 interlace
: 1/3 inch solid state image device
CCD
: 795 (H) x 596 (V)
: 752 (H) x 582 (V)
: Internal sync, Line lock manually
switchable
: 520 TV lines horizontally, 400 TV
lines vertically
: 1.0 Vp-p/75 ohms, composite
: More than 48 dB
: Approx. 1.0 lux with a F 1.2 lens
: Manual ON/OFF switching,
MULT/CENT switching (Active when
using an auto-iris lens)
: Manual EI/AI switching
: 1.0 lux to 50,000 lux (F 1.2 lens)
: 8 speeds, selectable by switches:
(1/50, 1/120, 1/250, 1/500, 1/1000,
1/2000, 1/4000, 1/10000 sec.)
: 12.5 mm ± 0.5 mm
: ATW/Manual switching
: CS mount (or C mount with the
supplied adaptor)
Environmental conditions
Power supply
Power consumption
Weight
SERVICE
This camera is a precision instruments and if treated with care, will
provide years of satisfactory performance. However, in the event of a
problem, the owner is advised not to attempt to make repairs or open
the cabinet. Servicing should always be referred to your dealer or
Sanyo Authorized Service Centre.
: Temperature: –10˚C ~ +50˚C
Humidity: less than 90% (no
condensation)
: 24 V AC, 50 Hz
: Approx. 3.5 W (with AI, lens)
Approx. 2.6 W (without AI, lens)
: Approx. 310 g (without lens)
Advertisement
Table of Contents
