Reseting Disks To Non-Raid; Exiting Setup - ECS B85H3-M5 User Manual

Name
Volume0
[ ]Select
Resetting disks to Non-RAID
An HDD that has been previously configured as part of another RAID set
in another platform is called a broken RAID HDD. When you install a broken
RAID HDD, you cannot select this disk when configuring a RAID set through
the Intel
broken RAID HDD as part of the RAID set configured through the Intel
Matrix Storage Manager, you may do so by resetting the disk to Non-RAID.
You will, however, lose all data and previous RAID configurations.
To reset disks to Non-RAID:
1. In the main Intel
Disks to Non-RAID using the up/down arrow key then press <Enter>.
2. Use the space bar to select the HDD to reset to Non-RAID.
3. A dialogue box appears to confirm the action. Press <Y> to confirm;
otherwise, press <N>.

Exiting Setup

When you have finished, highlight Exit using the up/down arrow key then press
<Enter> to exit the Intel
A dialogue box appears to confirm the action. Press <Y> to confirm; otherwise, press
<N> to return to the Intel
76
Intel(R) Matrix Storage Manager option ROM 11.0.0.1204
Copyright(C) 2003-07 Intel Corporation. All Rights Reserved.
[ CREATE VOLUME MENU
Level Drives
RAID0(Stripe) 2
[ DELETE VOLUME VERIFICATION
ALL DATA IN THE VOLUME WILL BE LOST!
Are you sure you want to delete "Volume0"? (Y/N):
Deleting a volume will reset the disks to non-RAID.
WARNING: ALL DISK DATA WILL BE DELETED.
[ESC]-Previous Menu
Pressing <Y> deletes all the data in the HDDs.
®
Matrix Storage Manager option. If you still want to use this
®
Matrix Storage Manager RAID BIOS menu, highlight Reset
[ Main Menu
1. Create RAID Volume
2. Delete RAID Volume
3. Reset Disks to Non-RAID
Pressing <Y> deletes all the data in the HDDs.
®
Matrix Storage Manager RAID BIOS utility.
®
Matrix Storage Manager RAID BIOS menu.
B85H3-M5 USER MANUAL
]
Capacity Status Bootable
931.5GB Normal Yes
]
[DEL]-Delete Volume
]
4. Recovery Volume Options
5. Acceleration Options
6. Exit
®