ECS B85H3-M5 User Manual page 78

4. When done, press <Enter> to confirm the creation of the RAID set. A
dialogue box appears to confirm the action. Press <Y> to confirm;
otherwise, press <N>.
Pressing <Y> deletes all the data in the HDDs.
5. The following screen appears, displaying the relevant information about
the RAID set you created.
RAID Volumes:
ID
0
Physical Disks:
Port Drive Model
4
5
Users please be noted that RAID 0 (Stripe) is set to accelerate the data
access, and RAID 1 (Mirror) is set to provide the data backup. If you want
to set RAID 0, you need to set the 2nd Boot Device item in the BIOS to Intel
Volume0. See section "Advanced Setup" for details.
74
Intel(R) Matrix Storage Manager option ROM 11.0.0.1204
Copyright(C) 2003-07 Intel Corporation. All Rights Reserved.
[ CREATE VOLUME MENU
Name: Volume0
RAID Level: RAID0(Stripe)
Disks:
Strip Size: 128KB
Capacity: 931.5 GB
WARNING: ALL DATA ON SELECTED DISKS WILL BE LOST.
Are you sure you want to create this volume? (Y/N):
Press ENTER to create the specified volume.
[ ]Change [TAB]-Next [ESC]-Previous Menu [ENTER]-Select
[ DISK/VOLUME INFORMATION
Name Level
Volume0 RAID0(Stripe) 128KB 931.5GB
Serial #
Maxtor 7H500F0 H81D3FLH
ST3500320AS 5QM0KLEY
B85H3-M5 USER MANUAL
]
Select Disks
]
Strip Size Status
Normal
Size Type/Status (Vol ID)
465.8GB Member Disk(0)
465.8GB Member Disk(0)
Bootable
Yes