Reseting Disks To Non-Raid; Exiting Setup - ECS Z77H2-A2X Deluxe User Manual

Resetting disks to Non-RAID
An HDD that has been previously configured as part of another RAID set
in another platform is called a broken RAID HDD. When you install a bro-
ken RAID HDD, you cannot select this disk when configuring a RAID set
through the Intel
this broken RAID HDD as part of the RAID set configured through the Intel
Matrix Storage Manager, you may do so by resetting the disk to Non-RAID.
You will, however, lose all data and previous RAID configurations.
To reset disks to Non-RAID:
1. In the main Intel
Disks to Non-RAID using the up/down arrow key then press <Enter>.
2. Use the space bar to select the HDD to reset to Non-RAID.
3. A dialogue box appears to confirm the action. Press <Y> to confirm; other-
wise, press <N>.
Pressing <Y> deletes all the data in the HDDs.

Exiting Setup

When you have finished, highlight Exit using the up/down arrow key then press <En-
ter> to exit the Intel
A dialogue box appears to confirm the action. Press <Y> to confirm; otherwise, press
<N> to return to the Intel
86
®
Matrix Storage Manager option. If you still want to use
®
Matrix Storage Manager RAID BIOS menu, highlight Reset
®
Matrix Storage Manager RAID BIOS utility.
®
Matrix Storage Manager RAID BIOS menu.
Z77H2-AX Deluxe USER MANUAL
®