Boot Menu - ECS B85H3-M5 User Manual

Boot Menu

This page enables you to set the keyboard NumLock state.
Main Advanced Chipset
Boot Configuration
Operating system select
Launch PXE OpROM
Launch Storage OpROM
Fast Boot
Bootup NumLock State
Quiet Boot
Boot Mode Select
Set Boot Priority
Boot Option #1
Boot Option #2
Boot Option #3
Boot Option #4
Boot Option #5
Boot Option #6
Boot Option #7
f
UEFI Hard Disk Drive Priorities
f
UEFI CD/DVD ROM Drive Priorities
Boot Configuration
This item shows the information of the Boot Configuration.
Operation System Select (Windows 7 or other OS)
This item is used to select the operation system.
Launch PXE OpROM (Disabled)
The item enables or disables launch PXE Option ROM.
Launch Storage OpROM (Enabled)
Use this item to enable or disable the Storage OpROM.
Fast Boot (Disabled)
This item enables or disables boot with initialization of a minimal set of device re-
quired to launch active boot option. Has no effect for BBS boot options.
Bootup NumLock State (On)
This item enables you to select NumLock state.
Quiet Boot (Enabled)
This item enables or disables quiet boot.
Boot mode select (LEGACY)
Use this item to select boot mode.
Set Boot Priority
This item enables you to set boot priority for all boot devices.
Boot Option #1 /2 /3 /4 /5 /6 /7
These items show the boot priorities.
Hard Disk Drive/ CDROM/DVD Drive BBS Priorities
These items enable you to specify the sequence of loading the operating system.
Press <Enter> to see the submenu.
66
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
M.I.B.X Boot
[Windows 7 or other OS]
[Disabled]
[Enabled]
[Disabled]
[On]
[Enabled]
[UEFI]
[CD/DVD: UEFI: ATAPI...]
[Hard Disk]
[USB CD/DVD]
[USB Hard Disk]
[USB Flash]
[USB Floppy]
[Network]
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.
B85H3-M5 USER MANUAL
Security Exit
Windows 7 or Other OS: Boot policy
for Legacy OS.
Windows 8: Boot policy for UEFI OS
without Compatibility Support Module
(CSM).
Manual: User customized CSM
parameters & boot policy.
lk
:Select Screen
mn
:Select Item
Enter : Select
+/- : Change Opt.
F1:General Help
F2:Previous Values
F3:Optimized Defaults
F4:Save & Exit
ESC:Exit