Imaging Tab - Kyocera FS-C5020N Product Manual

KX Driver FS-C5016N
Font Settings - This area provides
alternative methods for sending TrueType
fonts to the FS-C5016N. Users can choose
from three methods:
Download TrueType Fonts as Outline
Sends TrueType Font Outlines to the
FS-C5020/30N and is the default
setting. In rare situations when issues are encountered printing these
fonts, users can choose from Download TrueType Fonts as Bitmap or
Substitute with Device Fonts.
Download TrueType Fonts as Bitmap
TrueType fonts to be sent as bitmap fonts.
Substitute with Device Fonts
Printer fonts instead of downloading TrueType Fonts, documents are
typically printed faster. Users may find the same document appears
different when printed on another printer because the same font may
not be available.
Disable Device Fonts
downloaded, thus ensuring accurate output.
FS-C5020N and FS-C5030N Product Guide
Advanced Layout Settings
When
Layout Tab, users can choose a Gutter
Width from .2 to 1.0, and specify whether
the gutter should be on the left or top of the
page. In addition, users can choose to print
the entire page by selecting Reduce Image
to Fit (default), on pages where text or an
image extends into the gutter.
- Since activation of this feature uses built-in
- Users select this when all fonts are to be
- 31 -
Advanced is selected, from the

Imaging Tab

This tab enables
users to access the
following features:
Print Quality
default setting for this
feature is High Quality.
By selecting Custom,
users can enable
EcoPrint - a toner saving
feature. (also available at
Control Panel.)
-
- Activation of this feature causes
- The