Kyocera FS-1010 Operation Manual page 31

Indicators
Indicator
(No indication patterns
available)
(No indication patterns
available)
KM-NET for Clients display
Paper path error
Replace toner
TK-17
Set paper
Press GO
Toner low
TK-17
Warning
image adapt
Warning
low memory
Warning waste
toner box
There is no cassette in the feeder, or the
cassette is not inserted properly.
After reinserting the paper cassette, you should be
able to print.
There is no more toner in the toner container.
The printer has stopped because there is no more
toner. Replace with a new toner kit. After replacing,
be sure to clean the printer. (See
There is no paper in the MP tray.
Add paper to the tray. Press the
printing.
Feeding the paper having a paper size
which does not match the current paper
size from the MP tray can cause paper jam.
There is not enough toner inside the toner
container.
Promptly replace with a new toner as the printer
will stop printing before long. Clean the printer
after replacement. (See
The print job cannot be done at current resolution
because there is not enough internal memory.
Try adding memory or changing resolution.
The printer's memory is running low because
of the number of downloaded fonts and macros.
Print a status page to see how much user memory is
left and try deleting unnecessary fonts and macros.
The waste toner reservoir is almost full.
The waste toner reservoir will become full and the
printer will stop printing.
Contact your Kyocera Mita dealer.
3-7
Corrective Action
Chapter
key to resume
Chapter 2)
2)