D-Link DMC-805X User Manual page 6

10g cx4 to 10g sfp+ mediaconverter

Hide thumbs Also See for DMC-805X:

Table of Contents

Follow up the following steps to install the

converter onto a carrier supplied with D-Link

special designed chassis (DMC-1000):

Step 1- Unscrew and pull out the media converter board.

(Refer to figure 1)

Step 2-

Plug in the media board to any of the vacant

slot. (Refer to figure 2)

Step 3-

Fit the converter onto the carrier and use the

screw to secure it.

Figure 1

Figure 2

Table of Contents