UTStarcom VM1450 User Manual page 101

• If Bluetooth is disabled in your phone, you will get the message "Bluetooth is disabled. Enable?".
Press to enable Bluetooth.
5.
Your phone will search for a Bluetooth device within range. Once detected, the name will be
displayed.
6.
Press [Pair] to pair the devices. "Add [device name] to my device?" will be displayed.
Press for "Yes".
7.
Enter your passcode then press
Typically the default passcode is 0000.
8.
Once your new Bluetooth device is paired with your phone, you will see a confirmation screen.
Press to connect the device to your phone.
SETTINGS
Customizes your phone and optimizes performance through a variety of settings:
1.
Press [Menu], then press
2.
Press "Settings".
• Set Bluetooth: Turn Bluetooth on or off.
• Handset's visibility: Select "Hidden" or "Shown to all".
• Handset's Name: Edit the name of the device.
3.
Press [Save] to save the settings.
CUSTOMIZING YOUR PHONE
[OK]. Consult your Bluetooth device manual for the code.
"Settings". Press "Bluetooth".
101