Speed Dial - UTStarcom VM1450 User Manual

SPEED DIAL

In idle mode, calls can be placed to numbers stored in speed dial by pressing & holding the location
number on the key pad. For a 2-digit location number, press the first number, then press and hold
the second number.
1.
Press [Menu], then press
2.
Press "Speed dial".
3.
To assign a phone number to a location, select the location then press
• "Empty" appears if the location is available.
Tip
4.
Highlight a name from your contact list. If the contact has more than 1 number saved, press
/ until the correct number for the speed dial location is shown.
5.
Press [Done] to save the number to the speed dial location. You will see the contact name
next to the speed dial location number in the speed dial list.
"Contacts".
STORING CONTACTS
[Assign].
55