Download  Print this page

Advertisement

Table of Contents
3-097-352-11(1)
Home Theatre
System

Operating Instructions

Owner's Record
The model and serial numbers are located on the rear of the unit. Record the
serial number in the space provided below. Refer to them whenever you call
upon your Sony dealer regarding this product.
Model No.
Serial No.
HT-DDW990
©2007 Sony Corporation

Advertisement

Table of Contents

   Related Manuals for Sony HT-DDW990

   Summary of Contents for Sony HT-DDW990

  • Page 1: Operating Instructions

    Owner’s Record The model and serial numbers are located on the rear of the unit. Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product. Model No. Serial No.
  • Page 2 WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. To prevent fire, do not cover the ventilation of the apparatus with newspapers, table-cloths, curtains, etc. And don’t place lighted candles on the apparatus.
  • Page 3: About This Manual

    About This Manual • The instructions in this manual are for model HT-DDW990. In this manual, models of area code U is used for illustration purposes unless stated otherwise. Any difference in operation is clearly indicated in the text, for example, “Models of area code CA only”.
  • Page 4: Table Of Contents

    Table of Contents Getting Started Description and location of parts...5 1: Installing speakers ...15 2: Connecting speakers...17 3a: Connecting the audio components...19 3b: Connecting the video components ...20 4: Connecting the antennas...28 5: Preparing the receiver and the remote ...29 6: Selecting the speaker system ...30 7: Calibrating the appropriate settings automatically...
  • Page 5: Getting Started

    Getting Started Description and location of parts Receiver Front panel SPEAKERS (OFF/A/B/A+B) AUTO CAL MIC VIDEO 3 IN/PORTABLE AV IN PHONES VIDEO L AUDIO R Name Function A ?/1 Press to turn the receiver on or off (page 29, 38, 39, 54). (on/standby) B SPEAKERS Press to select the speaker...
  • Page 6 Name Function K 2CH Press to select a sound field (page 49, 51, 54). A.F.D. MOVIE MUSIC L TUNING +/– Press to scan a station (page 55, 58). M TUNING MODE Press to select the tuning mode (page 55, 58). N MEMORY/ Press to store a station or enter the selection when...
  • Page 7 About the indicators on the display SP A SP B Name Function A SW Lights up when the audio signal is output from the SUB WOOFER jack. B LFE Lights up when the disc being played back contains an LFE (Low Frequency Effect) channel and the LFE channel signal is actually being...
  • Page 8 Name Function L D.RANGE Lights up when dynamic range compression is activated (page 41). M COAX Lights up when INPUT MODE is set to “AUTO IN” and the source signal is a digital signal being input through the COAXIAL jack, or when INPUT MODE is set to “COAX IN”...
  • Page 9: Rear Panel

    Rear panel DIGITAL OPTICAL ANTENNA DVD IN VIDEO 2/BD IN HDMI VIDEO 2/ BD IN COAXIAL VIDEO IN VIDEO IN VIDEO OUT VIDEO IN DMPORT AUDIO IN AUDIO IN AUDIO OUT AUDIO IN SA-CD/CD/CD-R VIDEO 1 A DIGITAL INPUT/OUTPUT section OPTICAL IN Connects to a DVD jacks...
  • Page 10 TV (page 23). Remote commander Connects to the You can use the supplied remote to operate the FM wire antenna receiver and to control the Sony audio/video supplied with this receiver (page 28). components that the remote is assigned to operate.
  • Page 11 VCD player, LD player, MD deck, DAT deck, tape deck, satellite tuner, Blu- ray disc recorder, or PSX. To enter the value of Sony TV, press TV (wj) and then press ENTER. MEMORY Press to store a station during tuner operation.
  • Page 12 Press to display and select items from the option menus TOOLS for DVD player or DVD/VHS COMBO. To display the options of Sony TV, press TV (wj) and then press OPTIONS TOOLS. K MENU Press to display the menus of...
  • Page 13 DVD player, Blu-ray disc recorder, PSX, DVD/VHS COMBO, or satellite tuner is displayed on the TV screen. To return to the previous menu of Sony TV, press TV (wj) and then press RETURN/EXIT O. Name Function After pressing RECEIVER (D), press MENU (K) for...
  • Page 14 (J), MENU (K), RETURN/EXIT O (T), (U), and V/v/B/b (U) buttons to perform menu operations for Sony TVs only. wk RM SET UP Press to set up the remote. The number 5, TV CH +, PRESET + and H buttons have tactile dots. Use the tactile dots as references when operating the receiver.
  • Page 15: 1: Installing Speakers

    1: Installing speakers This receiver allows you to use a 5.1 channel system (5 speakers and one sub woofer). To fully enjoy theater-like multi channel surround sound requires five speakers (two front speakers, a center speaker, and two surround speakers) and a sub woofer (5.1 channel).
  • Page 16 • Contact a screw shop or installer regarding the wall material or screws to be used. • Sony is not responsible for accident or damage caused by improper installation, insufficient wall strength or improper screw installation, natural calamity, etc.
  • Page 17: 2: Connecting Speakers

    2: Connecting speakers DVD IN DVD IN VIDEO 2/BD IN VIDEO 2/BD IN HDMI HDMI VIDEO OUT VIDEO OUT SAT IN SAT IN DVD IN DVD IN VIDEO IN VIDEO IN VIDEO IN VIDEO IN VIDEO OUT VIDEO OUT VIDEO IN VIDEO IN MONITOR MONITOR...
  • Page 18 To connect the speakers correctly Check the speaker type by referring to the speaker label* on the rear panel of the speakers. Character on Speaker type speaker label Front left Front right Surround left Surround right * The center speaker and sub woofer do not have any character on the speaker label.
  • Page 19: 3a: Connecting The Audio Components

    3a: Connecting the audio components Connecting a Super Audio CD/CD player or CD recorder The following illustration shows how to connect a Super Audio CD player, CD player or CD recorder. After connecting your audio component, proceed to “3b: Connecting the video components”...
  • Page 20: 3b: Connecting The Video Components

    3b: Connecting the video components How to connect your components This section describes how to connect your video components to this receiver. Before you begin, refer to “Component to be connected” below for the pages which describe how to connect each component. After connecting all your components, proceed to “4: Connecting the antennas”...
  • Page 21 COAXIAL DMPORT SA-CD/CD/CD-R A HDMI cable (not supplied) We recommend that you use a Sony HDMI cable. B Coaxial digital cord (supplied) C Optical digital cord (not supplied) The sound is output from the TV speaker only when a playback component and this receiver, as well as this receiver and the TV are connected via a HDMI jack.
  • Page 22 If you connect a Blu-ray disc player • Be sure to change the factory setting of the VIDEO 2 input button on the remote so that you can use the button to control your Blu- ray disc player. For details, see “Programming the remote”...
  • Page 23: Connecting A Tv

    Connecting a TV The image from a visual component connected to this receiver can be displayed on a TV screen. It is not necessary to connect all the cords. Connect audio and video cords according to the jacks of your components. Audio signals DIGITAL OPTICAL...
  • Page 24: Connecting A Dvd Player

    Connecting a DVD player/DVD recorder The following illustration shows how to connect a DVD player and DVD recorder. It is not necessary to connect all the cords. Connect audio and video cords according to the jacks of your components. Connecting a DVD player Audio signals DIGITAL OPTICAL...
  • Page 25: Connecting A Dvd Recorder

    Connecting a DVD recorder Audio signals DIGITAL OPTICAL ANTENNA DVD IN VIDEO 2/ BD IN COAXIAL VIDEO IN DMPORT AUDIO IN SA-CD/CD/CD-R A Audio cord (not supplied) B Video cord (not supplied) C Component video cord (not supplied) Notes • Be sure to change the factory setting of the VIDEO 1 input button on the remote so that you can use the button to control your DVD recorder.
  • Page 26: Connecting A Satellite Tuner

    Connecting a satellite tuner/ set-top box The following illustration shows how to connect a satellite tuner or set-top box. It is not necessary to connect all the cords. Connect audio and video cords according to the jacks of your components. Satellite tuner/Set-top box Audio signals Video signals...
  • Page 27 Connecting components with analog video and audio jack The following illustration shows how to connect a component which has analog jacks such as a VCR, etc. Audio signals DIGITAL OPTICAL ANTENNA DVD IN VIDEO 2/ BD IN COAXIAL VIDEO IN DMPORT AUDIO IN SA-CD/CD/CD-R...
  • Page 28: 4: Connecting The Antennas

    4: Connecting the antennas Connect the supplied AM loop antenna and FM wire antenna. FM wire antenna (supplied) DIGITAL OPTICAL ANTENNA VIDEO 2/ BD IN COAXIAL DMPORT SA-CD/CD/CD-R * The shape of the connector varies depending on the area code of this receiver. Notes •...
  • Page 29: 5: Preparing The Receiver And The Remote

    5: Preparing the receiver and the remote Connecting the AC power cord Connect the AC power cord to a wall outlet. AC power cord SURROUND CENTER To the wall outlet Performing initial setup operations Before using the receiver for the first time, initialize the receiver by performing the following procedure.
  • Page 30: 6: Selecting The Speaker System

    Inserting batteries into the remote Insert two R6 (size-AA) batteries in the RM-AAP017 remote commander. Observe the correct polarity when installing batteries. Notes • Do not leave the remote in an extremely hot or humid place. • Do not use a new battery with old ones. •...
  • Page 31: 7: Calibrating The Appropriate Settings Automatically (auto Calibration)

    7: Calibrating the appropriate settings automatically (AUTO CALIBRATION) This receiver is equipped with DCAC (Digital Cinema Auto Calibration) Technology which allows you to perform automatic calibration as follows: • Check the connection between each speaker and the receiver. • Adjust the speaker level. •...
  • Page 32: Performing Auto Calibration

    Performing Auto Calibration AV ?/1 RM SET UP SYSTEM STANDBY VIDEO 1 VIDEO 2 VIDEO 3 SA-CD/CD TUNER DMPORT RECEIVER A.F.D. MOVIE MUSIC SLEEP FM MODE D. TUNING AUTO CAL – /– – 0/10 CLEAR ENTER >10 MEMORY GUIDE DISPLAY OPTIONS RETURN/ MENU...
  • Page 33: Error Codes

    Error and warning codes Error codes When an error is detected during Auto Calibration, an error code will appear on the display cyclically after each measurement process as follows: Error code t blank display t (error code t blank display) t PUSH t blank display t ENTER Appears when there are more than one error code.
  • Page 34: 8: Adjusting The Speaker Levels And Balance (test Tone)

    Warning codes and solutions Warning Explanation code WARN. 40 The environment is noisy. WARN. 50 The center speaker is not connected. WARN. 51 The surround speakers are not connected. WARN. 60 The front speaker balance is out of range. WARN. 62 The center speaker level is out of range.
  • Page 35 Press RECEIVER. The RECEIVER indicator lights up and receiver operation is activated. Press MENU. “1-LEVEL” appears on the display. Press or b to enter the menu. Press V/v repeatedly to select “T. TONE”. Press or b to enter the parameter. Press V/v repeatedly to select “T.
  • Page 36: Playback

    Playback Selecting a component SYSTEM STANDBY VIDEO 1 VIDEO 2 VIDEO 3 SA-CD/CD DMPORT A.F.D. MOVIE SLEEP FM MODE D. TUNING – /– – 0/10 CLEAR >10 GUIDE RETURN/ MENU EXIT REPLAY ADVANCE < < TUNING – DISC SKIP TV VOL TV CH MASTER VOL PRESET...
  • Page 37 To avoid damaging your speakers Before you turn off the receiver, be sure to turn down the volume level. To listen to the sub woofer Be sure to use the buttons on the sub woofer for this operation. Press POWER. The POWER indicator lights up.
  • Page 38: Listening/watching A Component

    MUTING TOP MENU MENU TV INPUT WIDE Notes • The operation is described for a Sony Super Audio CD player. • Refer to the operating instructions supplied with the Super Audio CD player or CD player. Tips • You can select the sound field to suit the music.
  • Page 39: Watching A Dvd

    Watching a DVD RM SET UP AV ?/1 SYSTEM STANDBY VIDEO 1 VIDEO 2 VIDEO 3 SA-CD/CD TUNER DMPORT RECEIVER A.F.D. MOVIE MUSIC SLEEP FM MODE D. TUNING AUTO CAL SPEAKERS (OFF/A/B/A+B) – /– – AUTO CAL MIC 0/10 CLEAR ENTER >10 MEMORY...
  • Page 40: Amplifier Operations

    Amplifier Operations Navigating through menus By using the amplifier menus, you can make various adjustments to customize the receiver. SA-CD/CD DMPORT A.F.D. MOVIE SLEEP FM MODE D. TUNING – /– – 0/10 CLEAR >10 GUIDE RETURN/ MENU EXIT REPLAY ADVANCE <...
  • Page 41: Overview Of The Menus

    Overview of the menus The following options are available in each menu. For details on navigating through menus, see page 40. Menu Parameters [Display] [Display] LEVEL Test tone [T. TONE] [1-LEVEL] Front speaker balance (page 43) [FRT BAL] Center speaker level [CNT LVL] Surround left speaker level [SL LVL]...
  • Page 42 Menu Parameters [Display] [Display] AUDIO Digital audio input decoding [5-AUDIO] priority [DEC. PRI.] (page 45) Digital broadcast language selection Synchronizes audio with video output [A.V. SYNC.] Naming inputs VIDEO DIGITAL MEDIA PORT video [6-VIDEO] assign (page 46) [DMPORT V.] Naming inputs SYSTEM Front speakers distance [7-SYSTEM]...
  • Page 43: Adjusting The Level (level Menu)

    Adjusting the level (LEVEL menu) You can use the LEVEL menu to adjust the balance and level of each speaker. These settings are applied to all sound fields. Select “1-LEVEL” in the amplifier menus. For details on adjusting the parameters, see “Navigating through menus”...
  • Page 44: Adjusting The Tone (tone Menu)

    Adjusting the tone (TONE menu) You can use the TONE menu to adjust the tonal quality (bass/treble level) of the front speakers. Select “2-TONE” in the amplifier menus. For details on adjusting the parameters, see “Navigating through menus” (page 40) and “Overview of the menus”...
  • Page 45: Settings For The Tuner (tuner Menu)

    Settings for the tuner (TUNER menu) You can use the TUNER menu to set the FM station receiving mode and to name preset stations. Select “4-TUNER” in the amplifier menus. For details on adjusting the parameters, see “Navigating through menus” (page 40) and “Overview of the menus”...
  • Page 46: Settings For The Video (video Menu)

    x DUAL (Digital broadcast language selection) Lets you select the language you want to listen to during digital broadcast. This feature only functions for Dolby Digital sources. • DUAL M/S (Main/Sub) Sound of the main language will be output through the front left speaker and sound of the sub language will be output through the front right speaker simultaneously.
  • Page 47: Settings For The System (system Menu)

    Settings for the system (SYSTEM menu) You can use the SYSTEM menu to set the distance of the speakers connected to this receiver. Select “7-SYSTEM” in the amplifier menus. For details on adjusting the parameters, see “Navigating through menus” (page 40) and “Overview of the menus”...
  • Page 48: Surround Speaker Position

    x SUR POS. (Surround speaker position) Lets you specify the location of your surround speakers for proper implementation of the surround effects in the CINEMA STUDIO EX modes (page 52). • SIDE/LO Select if the location of your surround speakers corresponds to sections A and C. •...
  • Page 49: Calibrating The Appropriate Settings Automatically (a. Cal Menu)

    Calibrating the appropriate settings automatically (A. CAL menu) For details, see “7: Calibrating the appropriate settings automatically (AUTO CALIBRATION)” (page 31). Enjoying Surround Sound Enjoying Dolby Digital and DTS surround sound (AUTO FORMAT DIRECT) The Auto Format Direct (A.F.D.) mode allows you to listen to higher fidelity sound and select the decoding mode for listening to a 2 channel stereo sound as multi channel sound.
  • Page 50 Types of A.F.D. mode Decoding A.F.D. mode mode [Display] (Detecting A.F.D. AUTO automatically) [A.F.D. AUTO] Dolby Pro Logic PRO LOGIC [DOLBY PL] Dolby Pro Logic PRO LOGIC II MOVIE [PLII MV] PRO LOGIC II MUSIC [PLII MS] (Multi Stereo) MULTI STEREO [MULTI ST.] Note This function does not work for signals with a...
  • Page 51: Selecting A Pre-programmed Sound Field

    Selecting a pre- programmed sound field You can take advantage of surround sound simply by selecting one of the receiver’s pre- programmed sound fields. They bring the exciting and powerful sound of movie theaters and concert halls into your home. SA-CD/CD TUNER DMPORT...
  • Page 52 * You can only select this sound field if the headphones are connected to the receiver. Effect Reproduces the sound characteristics of the Sony Pictures Entertainment “Cary Grant Theater” cinema production studio. This is a standard mode, great for watching almost any type of movie.
  • Page 53 Sound fields with D CS mark use DCS technology. DCS is a unique sound reproduction technology for home theater developed by Sony, in cooperation with Sony Pictures Entertainment, for enjoying the exciting and powerful sound of movie theaters at home. With this “Digital Cinema Sound” developed...
  • Page 54: Using Only The Front Speakers And Sub Woofer (2ch Stereo)

    Using only the front speakers and sub woofer (2CH STEREO) In this mode, the receiver outputs the sound from the front left/right speakers and the sub woofer. When multi channel surround formats are input, the signals are downmixed to 2 channel with bass frequencies being output from the sub woofer.
  • Page 55: Tuner Operations

    Tuner Operations Listening to FM/AM radio You can listen to FM and AM broadcasts through the built-in tuner. Before operation, make sure you have connected the FM and AM antennas to the receiver (page 28). The tuning scale for direct tuning differs depending on the area code as shown in the following table.
  • Page 56: Presetting Radio Stations

    Direct tuning You can enter the frequency of a station directly by using the numeric buttons. VIDEO 1 VIDEO 2 VIDEO 3 SA-CD/CD DMPORT RECEIVER A.F.D. MOVIE SLEEP FM MODE D. TUNING – /– – 0/10 CLEAR ENTER >10 MEMORY Press TUNER repeatedly to select the FM or AM band.
  • Page 57: Tuning To Preset Stations

    Tune in the station that you want to preset using Automatic Tuning (page 55) or Direct Tuning (page 56). Switch the FM reception mode, if necessary (page 55). Press MEMORY. You can also use MEMORY/ENTER on the receiver. “MEMORY” lights up for a few seconds. Perform steps 4 and 5 before “MEMORY”...
  • Page 58: Naming Preset Stations

    Using the controls on the receiver Turn INPUT SELECTOR to select the FM or AM band. Press TUNING MODE repeatedly to select “PRESET T.”. Press TUNING + or TUNING – repeatedly to select the preset station you want. Naming preset stations SA-CD/CD DMPORT A.F.D.
  • Page 59: Other Operations

    Press or b to enter the parameter. The cursor flashes and you can select a character. Follow the procedure given in “To create an index name” below. To create an index name Use V/v/B/b to create an index name. Press V/v to select a character, then press B/b to move the cursor to the next position.
  • Page 60: Enjoying The Digital Media Port (dmport)

    Enjoying the DIGITAL MEDIA PORT (DMPORT) The DIGITAL MEDIA PORT (DMPORT) allows you to enjoy sound from a network system such as a portable audio source or computer. By connecting a DIGITAL MEDIA PORT adapter (not supplied), you can enjoy sound from the connected component on the receiver.
  • Page 61: Connecting The Digital Media Port Adapter

    Connecting the DIGITAL MEDIA PORT adapter You can listen to the sound from the component connected through the DIGITAL MEDIA PORT adapter to the DMPORT jack on the receiver. DIGITAL MEDIA PORT adapter To one of the VIDEO IN jacks * The type of connector varies depending on the DIGITAL MEDIA PORT adapter.
  • Page 62 Listening to a connected component through DMPORT connection Press DMPORT. You can also use the INPUT SELECTOR on the receiver to select “DMPORT”. Start playback of the connected component. The sound is played back on the receiver. For details, see the operating instructions supplied with the DIGITAL MEDIA PORT adapter.
  • Page 63: Naming Inputs

    Naming inputs You can enter a name of up to 8 characters for inputs and display it on the receiver’s display. This is convenient for labeling the jacks with the names of the connected components. Press one of the input buttons to select the input you want to create an index name for.
  • Page 64: Using The Sleep Timer

    Using the Sleep Timer You can set the receiver to turn off automatically at a specified time. Press SLEEP repeatedly while the power is on. Each time you press the button, the display changes cyclically as follows: 1-30-00 t 1-00-00 t 0-30-00 2-00-00 t t OFF When sleep timer is activated, the display...
  • Page 65: Using The Remote

    Furthermore, you can also program the remote for Sony components that the remote is unable to control. Note that the remote can only control components that accept infrared wireless control signals.
  • Page 66: Other Components

    Use the numeric codes in the tables below to control non-Sony components and also Sony components that the remote is normally unable to control. Since the remote signal that a component accepts differs depending on the...
  • Page 67 742, 743, 744, 745 SANYO 717, 720, 746 SHARP 748, 749 TELEFUNKEN 751, 752 TOSHIBA 747, 756 ZENITH * If an AIWA VCR does not work even though you enter the code for AIWA, enter the code for Sony instead. continued...
  • Page 68 To control a DVD player Maker Code(s) SONY 401, 402, 403 BROKSONIC DENON HITACHI 415, 423 MITSUBISHI ORITRON PANASONIC 406, 408, 425 PHILIPS PIONEER 409, 410 SAMSUNG 416, 422 TOSHIBA 404, 421 ZENITH 418, 420 To control a DVD recorder...
  • Page 69 503, 517, 566 YORK ZENITH 542, 543, 567 509, 510, 503, 544 LOEWE 515, 534, 556 To control a satellite tuner Maker Code(s) SONY 801, 802, 803, 804, 824, 825, 865 AMSTRAD 845, 846 BskyB GENERAL ELECTRIC (GE) GRUNDIG 859, 860...
  • Page 70: Additional Information

    To control a tuner Maker Code(s) SONY 002, 005 To control a Blu-ray disc recorder Maker Code(s) SONY 310, 311, 312 To control a PSX Maker Code(s) SONY 313, 314, 315 To control a DVD/VHS COMBO Maker Code(s) SONY To control a DVD/HDD COMBO...
  • Page 71: Precautions

    x Dolby Surround (Dolby Pro Logic) Audio processing technology developed by Dolby Laboratories, Inc. Center and mono surround information is matrixed into two stereo channels. When reproduced, audio is decoded and output in 4 channel surround sound. This is the most common audio processing method for DVD video.
  • Page 72 Do not use any type of abrasive pad, scouring powder, or solvent, such as alcohol or benzine. If you have any questions or problems concerning your receiver, please consult your nearest Sony dealer.
  • Page 73: Troubleshooting

    Troubleshooting If you experience any of the following difficulties while using the receiver, use this troubleshooting guide to help you remedy the problem. Audio There is no sound, no matter which component is selected, or only a very low-level sound is heard. •...
  • Page 74 There is severe hum or noise. • Check that the speakers and components are connected securely. • Check that the connecting cords are away from a transformer or motor, and at least 10 feet away from a TV set or fluorescent light.
  • Page 75: Error Messages

    • The AUX button on the remote are not available for receiver operation. • When you operate a programmed non- Sony component, the remote may not function properly depending on the model and the maker of the component. Error messages If there is a malfunction, the display shows a message.
  • Page 76: Specifications

    If the problem persist Consult your nearest Sony dealer. Note that if service personnel changes some parts during repair, these parts may be retained. Reference sections for clearing the receiver’s memory...
  • Page 77 Reproduction frequency range: 28 – 20,000 Hz FM tuner section Tuning range 87.5 - 108.0 MHz Antenna FM wire antenna Antenna terminals 75 ohms, unbalanced Intermediate frequency 10.7 MHz AM tuner section Tuning range Models of area code U, CA With 10-kHz tuning scale: 530 –...
  • Page 78 • Sub woofer (SA-WP780) AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION: (Models of area code U only) With 6 ohm loads, from 28 – 200 Hz; rated 120 watts, minimum RMS power, with no more than 1% total harmonic distortion from 250 milliwatts to rated output.
  • Page 79: Index

    Index Numerics 2CH STEREO 54 5.1 channel 15 AUTO CALIBRATION 31 AUTO FORMAT DIRECT (A.F.D.) 49 Blu-ray disc player connecting 21 CD player connecting 19 playback 38 CD recorder connecting 19 Digital Cinema Sound (DCS) 53 DIGITAL MEDIA PORT connecting 61 input 36 video assign 62 Dolby Digital 70...
  • Page 80 Sony Corporation Printed in Malaysia...

This manual is also suitable for:

Str-k990

Comments to this Manuals

Symbols: 0
Latest comments: