Installing The Driver For A Cna Card; Installing The Suse Linux Enterprise Server 11 Operating System With Service Pack 2 - Lenovo ThinkServer RD540 Operating System Installation Manual

1. Copy the HBA card driver from the ThinkServer EasyStartup DVD to your local drive. Double-click the
EXE file to unzip it to a folder. Copy the folder to your USB storage device and connect the USB
storage device to your server.
2. Log in to the operating system and copy the folder from your USB storage device to the /tmp directory
on your server.
3. Input the following commands to install the driver.
cd /tmp
cd / elx_suse11v82210
./ elx_lpfc_install.sh
Note: The elx_suse11v82210 represents the name of the driver package file and the elx_lpfc_install.sh
represents the name of the driver. Use the corresponding file names on your server.
4. Restart your server.

Installing the driver for a CNA card

This topic provides instructions on how to install the driver for a CNA card.
To install the driver for a CNA card, do the following:
1. Copy the CNA card driver from the ThinkServer EasyStartup DVD to your local drive. Unzip the driver
file to a folder. Copy the folder to your USB storage device and connect the USB storage device to
your server.
2. Log in to the operating system and copy the folder from your USB storage device to the /tmp directory
on your server.
3. Use the following commands to install the driver.
• For Fibre Channel over Ethernet (FCoE) and iSCSI over Ethernet (ISOE) protocols:
cd /tmp
cd /qla2xxx_8242
./extras/build.sh
Note: The qla2xxx_8242 represents the name of the driver package file and the build.sh represents
the name of the driver. These names might be different on your server. Use the corresponding
file names on your server.
• For NIC protocol:
cd /tmp
cd qlcnic-5.0.29.2
./qlcnic-src-install.sh –b
./qlcnic-src-install.sh -i
Note: The qlcnic-5.0.29.2 represents the name of the driver package file and the qlcnic-src-install.sh
represents the name of the driver. These names might be different on your server. Use the
corresponding file names on your server.
4. Restart your server.
Installing the SUSE Linux Enterprise Server 11 operating system with
Service Pack 2
This topic provides instructions on how to install the SUSE Linux Enterprise Server 11 (x64 or x86) operating
system with Service Pack 2.
Note: The maximum system memory for the SUSE Linux Enterprise Server 11 (x86) operating system
with Service Pack 2 is 16 GB.
.
Chapter 2 Installing an operating system in Legacy mode
17