Digital Audio Outputs - Harman Kardon DPR2005 Service Manual

Harman/kardon digital path audio/video receiver
Hide thumbs Also See for DPR2005:
Table of Contents

Advertisement

PR1005/DPR2005
D
TABLE 13: SDI Input to Channel Mapping (Continued)
4.2.3
ZONE 2 DIGITAL INPUTS
Z2_MCLK
This pin is the master clock input for Zone 2. The master clock must be an integer multiple of the
Z2_LRCLK frequency. The default master clock is 12.288 MHz which corresponds to a 48 kHz sample
rate (Fs) * 256. Z2_MCLK is required if the second zone featured is enabled. The Z2_MCLK is a 3.3 volt
input.
Z2_LRCLK
This pin is the framing clock of the serial data input for Zone 2. The serial input data is transmitted as two
channels every sample rate period. The Z2_LRCLK determines the start of each data pair. The
Z2_LRCLK frequency determines the input sample rate (Fs).The Z2_LRCLK is a 3.3 volt input.
Z2_SCLK
This pin is the Shift Clock input for Zone 2. The serial clock is used to frame each input bit of the serial
input data. The shift clock frequency is typically 64*Fs. The Z2_SCLK is a 3.3 volt input.
Z2_SDI
This pin is the Serial Data input for Zone 2. Serial Digital Data is arranged as a single left/right input. The
input format options are I
available. The Z2_SDI is a 3.3 volt input.
TABLE 14: Z2_SDI Input to Channel Mapping
4.2.4

DIGITAL AUDIO OUTPUTS

LRCLKO
This pin is the framing clock for the serial data for the primary channels on SDO[4:1]. The serial output
data is transmitted as two channels every sample rate period. The LRCLKO determines the start of each
data pair. The LRCLKO frequency determines the input sample rate (Fs).The LRCLKO is a 3.3 volt
output.
SCLKO
This pin is the Shift Clock output for the primary channels on SDO[4:1]. The serial clock is used to frame
each input bit of the serial output data. The shift clock frequency is typically 64*Fs. The SCLKO is a 3.3
volt output.
SDO[4:1]
These pins provide the Serial Data Output for primary Channels. Serial Data is arranged as four left/right
outputs. The SDO is a 3.3 volt output. Note that although input channel 8 does not map to a speaker
output, the results of processing channel 8 may be output on SDO[4].
TABLE 15: SDO Output to Channel Mapping
GR70 Data Sheet
Aug 26, 2003 v1.82
2
1
3
2
4
2
5
3
6
3
7
4
8
4
Zone 2 Master System Clock
Zone 2 Left/Right Clock
Zone 2 Shift Clock
Zone 2 Serial Data Input
2
S, Left Justified, and Right Justified. 16, 18, 20, and 24 bit data lengths are
Channel
ZONE 2 SDI Input
1
1
2
1
Output Left/Right Clock
Output Shift Clock
Serial Data Output
Channel
SDO Outputs
1
1
2
1
3
2
Right
Left
Right
Left
Right
Left
Right
Left or Right
Left
Right
Left or Right
Left
Right
Left
46
harman/kardon
CONSUMER
13

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dpr1005

Table of Contents