Connecting Your Coaxial Digital Audio Source Device; Connecting Your Analog Recorder; Connecting Your Analog Audio Source Devices; Connect An Optional The Bridge Iiip - Harman Kardon HK BDS 270 Service Manual

harman/kardon
BDS 270/BDS 570

Connecting Your Coaxial Digital Audio Source Device

If one of your non-HDMI source devices has a coaxial digital output, connect it to the
receiver's coaxial Digital Input connector. note: Make only one type of digital connection
(HDMI, optical or coaxial) from each device.
coaxial-equipped
to coaxial Digital
audio output
coaxial Digital audio
cable (not supplied)

Connecting Your Analog Audio Source Devices

use the receiver's aux In connectors for up to two source devices that don't have HDMI
or digital audio connectors.
to Stereo analog
audio output
Stereo audio cable
12
Source Device
analog
Source Device
(not supplied)

Connecting Your Analog Recorder

connect an analog audio recorder's inputs to the receiver's analog audio output
connectors. you can record any analog audio input signal.
analog
recorder
to record
Inputs
Stereo audio cable
(not supplied)

Connect an Optional The Bridge IIIP

connect an optional the Bridge IIIp to the receiver's the Bridge IIIp connector. Insert the
plug until it snaps into place in the connector. IMPORTANT: Connect The Bridge IIIP
only with the receiver's power turned OFF.
the Bridge IIIp
BDS 270 + 570 Service Manual
Connections
Page 13 of 90