Electrical Adjustment - Sony TA-VE800G Service Manual

Integrated av amplifier

Hide thumbs Also See for TA-VE800G:

Operating instructions manual (181 pages)

Get started manual (2 pages)

Operating instructions manual (20 pages)

Table Of Contents

Table of Contents

3 7 63 1515 0

Video Frequency Adjustment

Connection:

OSD board

JW10

(FS CHECK)

Method:

1. Press the POWER button without connecting anything to the ex-

ternal input terminal (VIDEO IN etc.).

2. Adjust CT202 of the OSD board so that the reading on the fre-

quency counter becomes 17.734475 MHz ± 40 MHz.

OSD Width Adjustment

Connection:

TM201

!ª PIN (VIDEO)

SET

Method:

1. With the power turned OFF, press the TAPE MONITOR button

L 13942296513

and VIDEO 2 button simultaneously and turn on the power. The

position of the OSD image set by the user will be cleared and set

to position set at shipment.

2. The OSD function frame will be displayed on the monitor. This

screen will disappear in a few seconds automatically when the

input of codes using the remote commander stops.

If it disappears during adjustments, move the cursor of the at-

tached remote commander. The screen will appear again.

3. While watching the monitor screen, adjust CT201 of the OSD

board so that the following standard is satisfied.

OSD function frame

Adjustment standard:

Adjust so that the width A of the OSD function frame becomes the

www

same as space B of the monitor screen.

NOTE:

Extra margin is provided in this adjustment in consideration of the

deviation of the screen according to the type of monitor used.

Consequently, the user is able to adjust the position of the screen

freely. (For details, refer to "Adjustment of OSD Screen Position" in

1. Service Note. Refer to page 3.)

http://www.xiaoyu163.com