Quick Reference; Identifying The Parts And Controls - Sony DCR-TRV30E Service Manual

Maintenance information and
precautions
If batteries are leaking
•Wipe off the liquid in the battery compartment
carefully before replacing the batteries.
•If you touch the liquid, wash it off with water.
•If the liquid get into your eyes, wash your eyes
with a lot of water and then consult a doctor.
If any problem occurs, unplug your camcorder
and contact your nearest Sony dealer.
234

Identifying the parts and controls

qg
qh
qj
qk
ql
qg MEMORY EJECT lever (p. 146)
qh PHOTO button (p. 48, 153)
qj LOCK switch (p. 147)
qk DC IN jack (p. 21)
ql START/STOP button (p. 26)
w; EDITSEARCH button (p. 37)
wa NIGHTSHOT switch (p. 34)
ws SUPER NIGHTSHOT button (p. 34)
(LANC) control jack
wd
LANC stands for Local Application Control
Bus System. The control jack is used for
controlling the tape transport of video
equipment and other peripherals connected to
the video equipment. This jack has the same
function as the jack indicated as CONTROL L
or REMOTE.
wf S VIDEO jack (p. 44, 53, 89, 109, 162, 168)
wg i (headphones) jack
When you use headphones, the speaker on
your camcorder is silent.
Attaching the shoulder strap
Attach the shoulder strap supplied with your
camcorder to the hooks for the shoulder strap.
240
w;
wa
ws
wd
wf
wg
qg
qh
qj
qk
ql
w;
wa
ws
wd
wf
i
wg
1-53
— Quick Reference —
Identifying the parts
and controls
Camcorder
1
2
3
4
5
6
7
1 Flash (p. 49, 158)
2 Focus ring (p. 69)
3 Lens
4 Photocell window for flash
5 Microphone
6 Remote sensor
7 Camera recording lamp (p. 26)
8 SUPER LASER LINK (p. 46)
9 Viewfinder (p. 30)
q; Display window (p. 18)
qa FADER button (p. 59)
qs Focus switch (p. 69)
qd BACK LIGHT button (p. 33)
qf Infrared rays emitter (p. 34, 46, 98)
This mark indicates that this
product is a genuine accessory for
Sony video products.
When purchasing Sony video
products, Sony recommends that
you purchase accessories with this
"GENUINE VIDEO
ACCESSORIES" mark.
Note on the Carl Zeiss lens
Your camcorder is equipped with a Carl Zeiss lens
which can reproduce a fine image.
The lens for your camcorder was developed jointly
by Carl Zeiss, in Germany, and Sony Corporation. It
adopts the MTF* measurement system for video
camera and offers a quality as the Carl Zeiss lens.
* MTF is an abbreviation of Modulation Transfer
Function.
The value number indicates the amount of light of
a subject penetrating into the lens.
Identifying the parts and controls
wh
wj
wk
wl
e;
wh Intelligent accessory shoe (p. 116)
wj Power zoom lever (p. 31)
wk BATT release button (p. 17)
wl Hooks for shoulder strap
e; POWER switch (p. 18)
ea (USB) jack (p. 184, 185)
es (flash) button (p. 49, 158)
ed DV IN/OUT jack (p. 91, 111, 163, 169)
ef MIC jack (PLUG IN POWER)
Connect an external microphone
(optional). This jack also accepts
a "plug-in-power" microphone.
eg AUDIO/VIDEO jack (European models
only)/AUDIO/VIDEO ID-2 jack (Except for
European models)
(p. 44, 53, 89, 109, 162, 168)
Notes on the intelligent accessory shoe
• The intelligent accessory shoe supplies power to
optional accessories such as a video light or
microphone.
• The intelligent accessory shoe is linked to the
POWER switch, allowing you to turn the power
supplied by the shoe on and off. Refer to the
operating instructions of the accessory for further
information.
• The intelligent accessory shoe has a safety device
for fixing the installed accessory securely. To
connect an accessory, press down and push it to
the end, and then tighten the screw.
• To remove an accessory, loosen the screw, and
then press down and pull out the accessory.
8
9
q;
qa
qs
qd
qf
1
2
3
4
5
6
7
8
9
q;
qa
qs
qd
qf
*
239
ea
es
ed
ef
eg
wh
wj
wk
wl
e;
ea
es
ed
ef
eg
241