3.2.3.11 Image Transfer Roller Removal
the top cover. Remove the imaging cartridge. Cover the imaging cartridge to protect it
1.
from the light or place it in a dark area.
Remove the control panel. (Refer to Section
2.
Remove the paper cover.
3.
Remove the left and right covers. (Refer to section 3.2.2.1.)
4.
Remove the top cover. (Refer to Section 3.2.2.1.)
5.
Remove the rear frame. (Refer to Section 32.2.2.)
6.
Remove the fusing unit. (Refer to Section 3.23.9.)
7.
Slide the image transfer assembly to the left, lift up the right side, and remove the image
8.
transfer assembly.
Remove the image transfer roller.
9.
Figure 3-21. Removing the Image Transfer Assembly
Figure 3-22. Removing the Image Transfer Roller
Rev.
3-17