Maintenance; Customer Responsibilities; After Each Use; Lubrication - Craftsman 536.885214 Operator's Manual

CUSTOMER RESPONSIBILITIES
SERVICE RECORDS
Fillin dates asyou Before Every Every Every
complete r egular Each 5 10 25 Each Before SERVICE
service. Use Often Hours Hours Hours Season Storage DATES
N. s ! ...........................
Check Spark Plug -V r -V r
Drain Fuel E_ /
Check Adjustment of
Auger Control Cable -_
GENERAL RECOMMENDATIONS
The warranty on this snow thrower
does not cover items that have been
subjected to operator abuse or negli-
gence. To receive full value from the
warranty, the operator must maintain
the snow thrower as instructed in this
manual.
Some adjustments will need to be
made periodically to properly maintain
your snow thrower.
AFTER EACH USE
• Run the machine to clear the auger
of snow.
• To prevent freezing of the auger or
controls, remove all snow and slush
from the snow thrower.
• Check for any loose or damaged
parts.
• Tighten any loose fasteners.
• Check and maintain the auger.
• Check controls to make sure they
are functioning properly.
• If any parts are worn or damaged,
replace immediately.
LUBRICATION
Before Storage
1. Remove the top cover. See "How
To Remove The Top Cover".
2. Lubricate the chute control flange.
Apply a clinging type of grease such
as Lubriplate.
Chute Control
Flange
Figure 5
F-021001C 14