Kyocera KM-C2230 User Manual page 78

4.4 Interrupting a Copy Job 4
Additional Information
If the [Interrupt] key is not pressed after the inter-
rupting copy job is finished, the indicator on the
[Interrupt] key goes off and the interrupted copy
job automatically continues printing after the
length of time specified for the "Panel Reset Tim-
er" function has passed (or after 1 minute if the
function is set to "No"). For details on the "Panel
Reset Timer" function, refer to "Panel Reset Tim-
er" on page 2-17 of the User's Guide.
If optional finisher DF-621 is installed, and the in-
terrupted job is fed out to the secondary paper
output tray or job separator JS-621, the interrupt-
ed job automatically continues printing after the
interrupting copy job is finished. For details on
feeding copies to the secondary paper output tray
or job separator JS-621, refer to "Setting the "Pri-
ority Output Tray" Function" on page 10-27 of the
User's Guide.
4-15