Installing Lecnet2 ™ Software And Usb Driver - Lectrosonics Venue Instruction Manual

VR Field Wideband Receiver
Installing LecNet2
Software
IMPORTANT: Install the USB driver BEFORE
installing the software to simplify the process. See
the steps on the previous page.
This sequence and the screens are typical of installing
the drivers on a computer running 64-bit Windows 7.
Insert the disk and when the main screen appears,
select Install LecNet2 Software.
Select Install
LecNet2 Software
The welcome screen will appear. Click on Next to pro-
ceed to the installation.
The next screen presents the EULA (end user license
agreement) which must be approved to continue. Click
20
on the button labeled I Agree, then on Next to continue
with the installation.
The next screen will prompt you to select a folder for
the program. The default location appears automatically.
It is generally best to accept the default. You can also
choose to allow the software to run for anyone using
the computer, or just for the administrator installing the
software (you). Click Next to continue.
LECTROSONICS, INC.