4.6 Memory module
4.6
Memory module
Removing the Memory module
To remove the memory module, confirm that the computer is shut down. Then follow the
steps below and refer to Figure 4-5 and 4-6.
CAUTION: When removing the memory module, make sure the computer is powered off.
1. Loosen the screw fixing the memory cover.
2. Remove the memory cover.
PORTÉGÉ A600 Maintenance Manual (960-710)
Downloaded from LpManual.com Manuals
Removing a memory module with the power on might damage the module or
the computer itself.
Do not touch the connectors on the memory module or on the computer.
Dust and stains on the connectors may cause memory access problems.
Never press hard or bend the memory module.
Memory cover
Figure 4-5 Removing the memory cover
4 Replacement Procedures
Screw
[CONFIDENTIAL]
4-15