Toshiba PORTEGE A600 Maintenance Manual page 247

4.7 Base assembly
Installing the Base assembly
To install the base assembly, follow the steps below and refer to Figure 4-7.
1. Set the base assembly to the cover assembly.
2. Secure the base assembly and cover assembly with the following screws.
• M2×4C
• M2×6C
• M2.5×10C
PORTÉGÉ A600 Maintenance Manual (960-710)
Downloaded from LpManual.com Manuals
BIND screw
BIND screw
FLAT HEAD screw
4 Replacement Procedures
×1 (Described as "A" in the Figure 4-7)
×15 (Described as "B" in the Figure 4-7)
×2 (Described as "C" in the Figure 4-7)
[CONFIDENTIAL] 4-19