Toshiba PORTEGE A600 Maintenance Manual page 200

3 Tests and Diagnostics
3.29.2
For this subtest, connect the modem PCB and RJ11 connector with a harness. Use the
dedicated "FAT-MODE inspection device (product code: QE2000P01 made by Nitto Denki
Seisakusyo)" for the tests.
##################################################################
######
##################################################################
*
*
*
*
*
******************************************************************
.... Press test number[1-2] ?
To execute Modem test, press 2 and Enter. Following message will appear:
[Modem loopback test !]
ICHx MDC Test Program with Modem Sound (Line Test)
Version X.X
* Scorpio Modem Initialize
* Digital Loopback Test
* RJ11 Connector Check (LED)
OK is displayed when a error is detected, NG is display when a error is not detected.
NOTE: The menu displayed by your computer may be slightly different from the one
RJ11 Connection Check (LED) (Operator's Check LED) test will be executed, and the
following message will appear:
...Press Key (Y = OK , N =NG)
If the color in the LED of the connection checker is orange, press Y, otherwise, press N.
3-76 [CONFIDENTIAL]
Downloaded from LpManual.com Manuals
Modem test
AC97' Modem Controller Diagnostics program
1 ............
2 ............
shown above.
3.29 LAN/Modem/Bluetooth/IEEE1394 Test Program
(ICHx)
(ICH6)
:OK
:OK
:(Operator's Check!!)
PORTEGE A600 Maintenance Manual (960-710)
#######
*
*
*
*
*