Table of Contents
Advertisement
2 COPY FUNCTIONS
Press the [SETTING/OK] button.
6
7
Press the [CLEAR/STOP] button to exit from the menu.
Checking the function settings
Follow the steps below to check the function settings.
Press the [SETTING/OK] button to enter the basic setting menu.
1
Press the , , , or
2
READY
DRAWER:A4-R
AUTO
TEXT/PHOTO
Press the [SETTING/OK] button.
3
Press the
4
the current settings of the following functions.
FUNCTION
FINISHING
2IN1/4IN1
IMAGE SHIFT
EDGE ERASE
PAPER TYPE
ID CARD
DUAL PAGE
When you are finished with checking, press the
5
Press the [SETTING/OK] button.
6
7
Press the [CLEAR/STOP] button to exit from the menu.
62
Basic Copy Procedure
button to select the setting icon.
1
100%
or
button to scroll through the "SETTINGS" menu so that you can check
Message (Setting)
NONSORT, SORT, ROTATE
SORT
2IN1, 4IN1
LEFT MARGIN, RIGHT
MARGIN
EDGE ERASE
PLAIN, THICK1, THICK2,
TRANSPARENCY,
ENVELOPE
ID CARD
DUAL PAGE
Description
The current "FINISHING" setting is displayed.
P.70 "Sorting pages in the same order as the original"
The current "2IN1/4IN1" setting is displayed.
P.73 "Copying two or four pages on each sheet"
The current "IMAGE SHIFT" setting is displayed.
P.79 "Shifting the pages to the right or left"
This message is displayed when the "EDGE ERASE" function is on.
P.77 "Erasing the shadow on edges"
The current paper type setting for the bypass tray is displayed.
P.39 "Registering the size and type of paper loaded on the bypass
tray"
This message is displayed when the "ID CARD" function is on.
P.75 "Copying both sides of a card on a sheet"
This message is displayed when the "DUAL PAGE" function is on.
P.78 "Copying the right and left pages of a book separately"
or
button to select "CLOSE".
Advertisement
Table of Contents
