Table of Contents
Advertisement
3 PRINT FUNCTIONS
If you want to print the watermark on only the first page, select the Print on First Page
2
Only check box.
Set other necessary print options and click [OK].
3
Click [OK] or [Print] to start the print job.
4
The print job is printed with the watermark.
Creating or editing a watermark
You can add up to 15 watermarks.
Open the Effect tab and click [Add] to create a new watermark or select a watermark
1
from the list and click [Edit] to edit the watermark.
The Watermark dialog box appears.
Click [Restore Defaults] to restore all watermark settings to the default ones.
2
Enter the watermark text in the Caption box.
You can enter up to 63 characters for the watermark text.
Select a font for the watermark text from the Font Name list.
3
Select a font style for the watermark text from the Style list.
4
5
Enter the font size in the Font Size box.
You can enter any integer between 6 to 300 points in increments of 1 point.
To rotate the watermark, enter the value in the Angle box or move the scroll bar.
6
You can enter the angle from -90 to 90 degrees in increments of 1 degree.
7
Click "Solid", "Draw as Outline", or "Transparency" to select the print style.
Solid — Select this to print solid text.
Draw as Outline — Select this to print outline text.
Transparency — Select this for transparent text. Enter the value or move the scroll bar from 0 to 100% in
increments of 1%.
108
How to Use Useful Print Functions
Advertisement
Table of Contents
