Table of Contents
Advertisement
Position of Certification label, etc.
Certification label ( For the U.S.A. and Canada )
Explanatory label
Identification label
For the U.S.A. and Canada
For EU
Warning label
Warning for high-temperature areas (ventilation holes)
Warning for high-temperature areas (fuser unit)
Other points
Do not turn the power OFF with jammed paper left inside the equipment. This could cause malfunctions when the main
switch is turned ON next time.
Be sure to turn the power OFF when leaving the office or if there is a power failure.
Be careful because the paper exit area and paper just after exiting are hot.
Do not place anything other than paper on the receiving tray. This could disturb a normal operation and cause
malfunctions.
Do not touch the photoconductive drum surface or the transfer charger. This could cause image problems.
Do not open/close the covers and the bypass tray, or pull out the drawers during printing.
General Precautions
17
Advertisement
Table of Contents
