Table of Contents
Advertisement
2 COPY FUNCTIONS
Set the paper size and type for the paper source to use.
3
P.38 "Registering the size of paper loaded in the drawer"
P.39 "Registering the size and type of paper loaded on the bypass tray"
If you set a different paper type from that loaded on the bypass tray, paper jams could occur or the quality of the
copied images could be poor.
4
Select the drawer or the bypass tray to use.
You can change the paper source on the basic setting menu.
1) Press the [SETTING/OK] button to enter the basic setting menu.
2) Make sure that "DRAWER:xx" is selected.
If necessary, press the
variable "xx" indicates the paper size set as the default.
READY
DRAWER:A4-R
AUTO
TEXT/PHOTO
3) Press the [SETTING/OK] button.
4) Press the
The variable "xx" indicates the paper size set as the default.
5) Press the [SETTING/OK] button to return to the highest layer of the menu: if you press the [START] button
instead, the equipment starts copying immediately.
When you want to exit from the basic setting menu without changing the setting, select "CANCEL" with the
button and press the [SETTING/OK] button. You can also exit from the menu layers with the [CLEAR/STOP]
button.
Press the [START] button.
5
The equipment starts copying.
56
Basic Copy Procedure
or
button to select it. The choice may be "BYPASS:xx" if it is set as the default. The
1
100%
or
button to select "DRAWER:xx" or "BYPASS:xx".
or
Advertisement
Table of Contents
