RHINO 172 Operator's Manual page 121

All Safety Shields, Guards and Safety devices including (but not
limited to) - the Deflectors, Chain Guards, Steel Guards, Gearbox
Shields, PTO integral shields, and Retractable Door Shields should
be used and maintained in good working condition.
devices should be inspected carefully at least daily for missing or
broken components.
replaced at once to reduce the possibility of injury or death from
thrown objects, entanglement, or blade contact.
• Lift Type-Ensure the tailwheel beam position
support bolts are properly installed and
tightened.
• Inspect all bolts and screws and tighten to the
recommended torque. OPS-R-0039_E
• Ensure the tractor PTO master shield and the
mower slip clutch shield are in place, lowered,
and in good condition.
• Ensure the driveline integral shield is in good
condition and rotates freely.
• Ensure the driveline slip clutch (if equipped) is
properly adjusted. OPS-R-0039
172 08/12
© 2012 Alamo Group Inc.
OPERATION
Missing, broken, or worn items must be
Operation Section 4-19
All safety
(SGM-3)