Tractor Horsepower - RHINO 172 Operator's Manual

2.3 Tractor Horsepower

The power required to operate a mower is determined by the tractor PTO horsepower. For most mowing
conditions, the 172 mower requires a tractor with at least 35 HP. Operating the mower with a tractor that does
not have adequate power may damage the tractor engine. Exceeding 75 HP may cause mower damage by
overpowering the unit in heavy cutting conditions.
2.4 3-Point Hitch
The tractor 3-point hitch must be rated to lift at least
785 lbs.
The 172 mower is designed to be mounted on a
tractor with a CAT I 3-point hitch or CAT I Quick
Hitch. Refer to the tractor operator's manual for the
category of the tractor being used. If the hitch does
not conform to ASABE CAT I dimensions, the
mower may not fit or raise properly. Consult an
authorized dealer for
procedures to mount non-conforming hitches.
Depending on the hitch category, certain size pins
are used to attach the mower to the tractor. CAT I
hitches require 7/8" lower and 3/4" upper diameter
hitch pins. Quick Hitch requires 1-7/16" diameter
lower pin and 1-1/4" diameter upper pin.
Our 3-Point Quick Hitch is designed to connect to a
Quick-Attach coupler
dismounting your mower easier. The 3-Point Quick
Hitch is also designed to connect the mower to a
tractor's 3-point linkage without the use of a Quick-
Attach Coupler.
2.5 Front End Weight
A minimum of 20% total tractor weight must be maintained on the tractor front end at all times. Front end
weight is critical to maintain steering control and to prevent the tractor from rearing up while driving. If the
front end is too light, add weight until a minimum of 20% total weight is reached on the front tires. Front
weights and weight carriers can be purchased through an authorized tractor dealership. OPS-U- 0005
172 08/12
© 2012 Alamo Group Inc.
OPERATION
possible modification
making mounting and
Operation Section 4-5
Standard Hitch