Bgd36Cfg Venturi Adjustment; Flame Adjustment - Napoleon BGD36CFNTR Installation And Operating Instructions Manual

11.2.2

BGD36CFG VENTURI ADJUSTMENT

CARBON CAN BE DISTRIBUTED IN SURROUNDING LIVING AREA IF THE AIR SHUTTER IS IMPROP-
THE FRONT OF THE APPLIANCE BECOMES VERY HOT DURING OPERATION. LET THE APPLIANCE
This appliance has an air shutter that has been factory
set open according to the chart below:
Closing the air shutter will cause a more yellow fl ame,
but can lead to carboning. Opening the air shutter will
cause a more blue fl ame, but can cause fl ame lifting from
the burner ports. The fl ame may not appear yellow im-
mediately; allow 15 to 30 minutes for the fi nal fl ame color
to be established.
AIR SHUTTER ADJUSTMENT MUST ONLY BE DONE BY A QUALIFIED INSTALLER!
The alternate access is to remove the glass, glass ember tray and burner from the appli-
ance and then adjust the air shutter.
NOTE: When removing the glass ember tray make sure the glass embers are away from the center of the
screen, exposing the burner, before lifting glass ember tray out.
When replacing burner, absolutely no glass can be in cup surrounding the orifi ce. HINT: If glass falls into cup
and surrounds the orifi ce, insert a clean bag into a vacuum cleaner and vacuum out glass embers. Replacement
glass embers can be ordered from Wolf Steel Ltd.

11.3 FLAME ADJUSTMENT

BGD36CF
!
ERLY ADJUSTED.
COOL COMPLETELY BEFORE CONDUCTING SERVICE.
Turn clockwise to
increase fl ame height
ADJUSTMENT KNOB
WARNING
FLAME
51
BGD36CFG
NG 0
LP 1/4"
BGD36CFG
W415-0785 / A / 07.23.09