Suspensions
•
Apply a thin layer of lubricating grease
inside the speedometer transmission,
in the external seats of the wheel hub
and on the wheel axle.
•
Place the speedometer transmission
on the front wheel
•
Place the wheel between the fork rods
by inserting correctly the odometer
transmission in the housing on the fork
rod.
•
Insert the fork shaft and screw the nut
«1» to the prescribed torque.
Locking torques (N*m)
Wheel pin to fork fixing nut
•
Tighten the two locking «2» screws of
the wheel axle.
Locking torques (N*m)
Wheel pin hub fixing screw
Handlebar
Removal
NOTE
SUSP - 138
46.5
10
SPORTCITY ONE 125