Spark Plug; Spark Plug Electrode Gap; Hub Oil - APRILIA SPORTCITY ONE 125 Service Station Manual

Hide thumbs Also See for SPORTCITY ONE 125:
Table of Contents

Advertisement

SPORTCITY ONE 125

Spark plug

Check the spark plug according to the indications in the maintenance table. To reach it:
Remove the side fairings.
CAUTION
BEFORE CARRYING OUT THE FOLLOWING OPERATIONS AND IN ORDER TO AVOID BURNS,
LEAVE ENGINE AND MUFFLER TO COOL OFF TO AMBIENT TEMPERATURE.
Disconnect the cap.
Clean off any trace of dirt from the
spark plug base by blowing com-
pressed air.
Unscrew the spark plug and remove it from its seat, making sure no dust or dirt gets into the
cylinder.
Check that spark plug electrode and central porcelain insulator do not have carbon deposits
or corrosion; if necessary, remove them.
Use a thickness gauge to check the electrode gap and, if necessary, adjust it.
Make sure the washer is in good conditions.
Fit the washer and then finger tighten the spark plug.
Tighten to the specified torque.
Characteristic

Spark plug electrode gap

0.7 mm
Locking torques (N*m)
Spark plug 12 ÷ 14

Hub oil

Check
NOTE
USE RECOMMENDED OIL ONLY. REFER TO THE RECOMMENDED PRODUCTS TABLE.
Maintenance
MAIN - 29

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents