Wesmar SS395 Installation & Operation Manual page 2

Part 1:
Sonar Controls
1.1 Hand Control
All sonar adjustments are conducted
through the hand control.
1.1.1 Trigger Switch
The trigger switch will move the cursor from
the sonar screen to the selection screen when
adjustments are needed. After adjusting, the trig-
ger switch will return the cursor back to the sonar
.
screen
1.1.2 Four-way Control Switch
The four-way control switch will move the cursor
up/down, left/right on the sonar screen. By placing
the cursor on a target both horizontal and vertical
measurements are logged in the space noted by the
arrows, center right of screen.When the cursor is
in the selection screen the four-way switch will
move the cursor up/down to the item for adjust-
ment. Moving the four-way switch left/right will
make the change.
1.2 Switch Panel
Both the sonar and the hoist are independent
of one another. The sonar has its own on/
off switch and the hoist has its own down/
up switch.
2