Wesmar SS395 Installation & Operation Manual page 19

3. Paint inside with same bottom paint as hull.
8-inch seachest
1. use 8-inch Schedule 80 steel pipe
(7.625 in ID nominal)
2. Length between minimum (3.2.1)
and 40 in (1.2 m)
3. Paint inside with same bottom paint as hull.
2.3 Electrical Hoist
Installation
Note: The SS395 can be ordered with an electrical
hoist or a hydraulic hoist. Section 3.3 will cover
the electrical hoist with 3.6 will cover the hydraulic
hoist.
Checlist:
Calculate the length of the
soundome tube
Check soundome clearance
inside seachest
Fasten the soundome to the
soundome tube
Assemble hoist
Attach hoist to seachest
2.3.1 Calculate Lenth Of Soundome
Tube
There are two electrical hoist systems. One for the
6 in soundome and another for the 8 in soundome.
The difference between the two is the size of the
flange and the total travel.
1. 6 in soundome: measure the length of the
seachest and add 4 in (10 cm)
2. 8 in soundome: measure the length of the
seachest and add 5.5 in (14 cm)
When the proper length of the soundome tube is
determined, measure from the threaded end, mark
the length and cut. File the rough edges.
2.3.2 Check soundome clearance in
side seachest
The soundome should not fit tight inside the
19