Feature User Guide
GPS Location Service
5.12.1 Viewing Your Position
Procedure Steps
From the home screen, press MENU key.
1
2
Select Location → Position.
Scroll to view the results about the last time your location was calculated.
3
To refresh your position:
5.12.2 Changing GPS Accuracy
Procedure Steps
From the home screen, press MENU key.
1
Select Location → Accuracy.
2
3
Select one of the following:
• Medium (default) — Power consumption optimization is combined with less position accuracy.
• High – Better position accuracy is combined with less power consumption optimization.
If connected to an external charging device, the radio automatically enters the High mode.
5.13 Packet Data
The Packet Data (PD) Service allows you to transfer data in a TETRA system using the Internet Protocol (IP).
5-54
• SelectPosition — the radio refreshes its position automatically
• Press Refresh
-