Feature User Guide
3.6.9 Entering Emergency Mode
Press and hold the EMERGENCY button or enter the Emergency number and press SEND key to enter the
Emergency Mode.
The required time you need to press the EMERGENCY button is set to 0.5 second (by default). The
time can be configured by your service provider.
Upon entry into Emergency Mode any existing call or service other than packet data service is aborted or cleared
down. In the Emergency Mode, the radio automatically rejects private calls. The radio remains in Emergency
Mode until you exit it.
3.6.10 Exiting Emergency Mode
Prerequisites: Make sure that your radio is in Emergency Mode.
Procedure Steps
1
If your radio screen displays Emgcy Mic On, press End.
2
Press and hold Exit.
Result: Your radio exits the Emergency Mode.
3.6.11 Making an Emergency Group Call
Prerequisites: Make sure that your radio is in Emergency Mode.
Procedure Steps
Press and hold the PTT button.
1
2
Wait for the talk permit tone (if configured) and talk.
Release the PTT button to listen.
3
3.6.12 Receiving an Emergency Group Call
A radio receives an Emergency Group Call from the selected pre-programmed group. Audible tone indicates
incoming Emergency Group Call.
3-14
-