Power Management Setup - DFI G486-EVA User Manual

Up>, <Page Down>, <+> or <-> keys to make the
corresponding changes.
If the changes you make are incorrect or you change
your mind, press <F6> or <F7> to return to the default
settings. Press <Esc> after making the changes to return
to the main menu.

Power Management Setup

Use the arrow keys to highlight the "Power Management
Setup" and press <Enter>, a screen similar to the one
below will appear.
Power Management
Standby Mode Timer
Suspend Mode Timer
Video Standby Timer
HDD Standby Timer
Suspend Mode Speed
Standby Mode Speed
DMA Request Check
Keyboard/Mouse Check
Interrupt Check
Parallel Port Check
Serial Port Check
Hard Disk Check
Video Write Check
Local Master Check
Reset V-Timer Event
Choosing "User Defined" in the Power Management
option will allow you to set the time of the Standby
Mode Timer, Suspend Mode Timer, Video Standby
Timer, HDD Standby Timer, Suspend Mode Speed and
Standby Mode Speed. "Min Power Saving" and "Max
Power Saving" will show the minimum and maximum
value of these options. Choose "Disabled" if you do not
wish your system to enter the Standby mode.
ROM ISA BIOS
POWER MANAGEMENT SETUP
AWARD SOFTWARE, INC.
: Max Power Saving
: 16 Sec
: 4 Min
: 8 Min
: 1 Min
: STOP CLK2
: 1/4 Speed
: Enabled
: Enabled
: Enabled
: Disabled
ESC
: Enabled
F1
: Enabled
: Disabled F5
F6
: Enabled
F7
: Keyboard/Mouse
Initial Setup Program
: Quit : Select Item
: Help : Modify
PU/PD/+/-
: Color
: Old Values
(Shift) F2
: Load BIOS Defaults
: Load Setup Defaults
G486-EVA
3-8