Board Configuration - DFI G486-EVA User Manual

1. Position the SIM module above the SIMM socket
with the chips of the module facing the center of the
system board.
2. Seat the module at an angle into the bank. Make
sure it is completely seated. Tilt the module upright
until it locks in place in the socket.

Board Configuration

The G486-EVA is designed with jumpers and connectors
onboard. Make sure that the jumpers are set correctly
before installing the system board into your system unit.
JP1
JP2
Locations of Jumpers and Connectors
JP21
JP20
T10
JP14-JP18
EC100G
on the G486-EVA System Board
JP26
JP23
JP28
JP22
EC802G
JP29
JP24
JP34, JP35, JP38
Installation Overview
G486-EVA
JP25
JP27
S1
S2
JP30
S3
JP31
JP51
JP52
JP50 JP48
JP49
JP40
D6
JP42
JP43
JP46
JP47
2-5