Table of Contents
Advertisement
G486-EVA
Installing Upgrade CPUs
The G486-EVA is equipped with a 169-pin PGA (Pin
Grid Array) socket at location U22 of the system board.
The location of the PGA socket on the system board is
shown below.
EC802G
EC100G
PGA
U22
Socket
Pin 1 of the socket
Location of the PGA Socket on the G486-EVA System Board
To install an upgrade CPU, position the upgrade CPU
above the socket. Make sure pin 1 of the CPU is
aligned with pin 1 of the socket. Lower the chip until
the pins are inserted properly in their corresponding
holes.
Installation Overview
2-19
Advertisement
Table of Contents
