Delivery Content - RC Logger 88002RC Operating Instructions Manual

3. delIvery ConTenT

1
2
1 RC EYE 450 (pre-assembled)
2 Rectangular canopy
3 Optional canopy
4 Stabilizer
5 RC EYE Interface cable
6 2x Velcro® straps (red, black)
7 RC Logger lock strap
8 2x Direction indicator
9 2x Rubber band
10 4x Spinner and spring washer
The spare part list can be found on our website www.rclogger.com in the Accessories section
for the respective product.
The following components not included in delivery are required for assembly and operation:
assembly
Soldering iron and the necessary kit.
operation
To operate the model, a simple 6 channel remote control, a 3S (11.1 V) LiPo flight battery with approx. 2500 mAh
and a discharge rate of 25 C as well as a compatible LiPo charging device with LiPo balance charger are required.
14
13
12
16
15
3
11 10
7
4
11 4x Self-tapping screw and spring washer for
stabilizer
12 4x Stabilizer pads
13 Magic tape
14 Pillar Set (4x Pillars + 4x Lock Pins + 4x
Screws)
15 2x Right-turning propeller
16 2x Left-turning propeller
No fig.: Operating instructions
9 8
6
5
5