Checking The Configuration - RC Logger 88002RC Operating Instructions Manual

4. If the distance is below 5 mm, then you are required to increase the distance by removing some of the
canopy corner (see illustration) with a pair of scissors.
5. Once all corners are within the given distance, secure each corner with a lock pin.


8. CHeCkIng THe ConfIguraTIon

general Information
Please carry out the configuration of the RC EYE 450 as described in this chapter. Programming of the
channels is essential as otherwise the RC EYE 450 will not recognise your transmitting equipment. When
you have carried this out, your RC EYE 450 is then ready to fly.
17