Table of Contents
Advertisement
assembly of the propellers
The rotating direction of the rotors can be
seen in the adjacent picture (bird's eye
view). The position of the red direction
indicator on the landing leg and the arrow
on the radial arm is to be used as the
indication for the direction of the model and
is deemed to be "in front".
A second direction indicator (included in
delivery) can be installed when flying in
"x"-mode.
as the motors are pre-assembled, the rotating direction of the rotors on the basis of the
flight direction should be carefully observed!
The propellers in the centre line (1) turn clockwise (right rotating) and must be marked
with the inscription "right".
The propellers on the cross axis (2) turn anticlockwise (left rotating) and must be
marked with the inscription "left".
If the propellers are not installed as described, the programmed rotating directions will
no longer be in line with the rotating directions of the propellers. The rC eye 450 is
therefore no longer able to fly and can no longer be operated!
12
Advertisement
Table of Contents
