Location Of Controls; Direct Operation - Travis Industries 864 HO NB GSR2 Owner's Manual

8

Location of Controls

Swing the access door and control
cover down to access the battery
holder / switch.

Direct Operation

The fireplace may be directly operated from the battery holder. The three positions are below (see
ON – Burner turns on (regardless of transmitter settings).
OFF – Burner turns off (regardless of transmitter settings).
REMOTE – Burner is controlled by the transmitter.
NOTE: When the battery holder switch is turned to ON or OFF, the mode settings (Flame Height, Comfort
Control) will remain in the same state as before the switch was moved (i.e.: the IFC "remembers" the last
setting). If you wish to adjust the mode settings use the transmitter mode button to adjust the settings
(see "Mode Controls" on page 12). The thermostat and burner on/off operating functions will not work on
the transmitter.
© Travis Industries
Operation
4121004
Most features will be
controlled by the included
remote.
Figure 3
Figure 3
):
100-01300