Product Overview - Toro Power Max 38801 Operator's Manual

Heavy duty 928/1028 ohxe

Hide thumbs

Table Of Contents

Table of Contents

2. Move the speed selector to Position R1; refer to

Operating the Speed Selector (page 18).

3. Squeeze the left hand (traction) lever to the hand-grip

(Figure 21).

Figure 21

The machine should move rearward. If the machine

does not move or moves forward, complete the

following:

A. Release the traction lever and stop the engine.

B. Disconnect the trunnion from the speed selector

lever (Figure 12).

C. Turn the trunnion downward (clockwise) on the

speed control rod (Figure 12).

D. Connect the trunnion to the speed selector lever

(Figure 12).

4. Release the traction lever.

5. Move the speed selector to the Position F1; refer to

Operating the Speed Selector (page 18).

6. Squeeze the left hand (traction) lever to the hand-grip

(Figure 21).

The machine should move forward. If the machine

does not move or moves rearward, complete the

following:

A. Release the traction lever and stop the engine.

B. Disconnect the trunnion from the speed selector

lever (Figure 12).

C. Turn the trunnion upward (counterclockwise) on

the speed control rod (Figure 12).

D. Connect the trunnion to the speed selector lever

(Figure 12).

7. If you made any adjustments, repeat this procedure

until no adjustments are required.

Important: If the machine moves when the traction

lever is in the released position, check the traction cable

(refer to Checking and Adjusting the Traction Cable

(page 22)) or take the machine to an Authorized Service

Dealer for service.