Lincoln Electric Power Wave S350 Operator's Manual page 28

C-2
STICK OPTIONS
ACCESSORY KIT - 150 Amp
For stick welding. Includes 20 ft.
(6.1m) #6 electrode cable with lug,
15 ft. (4.6m) #6 work cable with
lugs, headshield, filter plate, work
clamp, electrode holder and sample
pack of mild steel electrode. For use with K2176-1
(Twist-Mate™ to Lug Adapter)
ORDER K875
ACCESSORY KIT - 400 AMP
For stick welding. Includes 35 ft.
(10.7m) 2/0 electrode cable with
lug, 30 ft. (9.1m) 2/0 work cable
with lugs, headshield, filter plate,
work clamp and electrode holder.
For use with K2176-1 (Twist-Mate™ to Lug Adapter)
ORDER K704
REMOTE OUTPUT CONTROL
Portable current control provides the
same dial range as the current control on
the welder. Consists of a 6-pin Amphenol
connector which plugs into the remote
control Amphenol. 25 foot cable length.
ORDER K857
ORDER K857-1 for 100 ft. (30 m)
STICK ELECTRODE HOLDER AND CABLE
ASSEMBLY
Includes 200A stick electrode holder and Twist-Mate
connector. 12.5 ft. cable length.
ORDER K2374-1
STICK ELECTRODE HOLDER CABLE AND WORK
CABLE ASSEMBLY
Includes 200A stick electrode holder, welding cable,
work clamp and Twist-Mate adapter.
ORDER K2394-1
TIG OPTIONS
Power Wave S350 Solenoid Kit
®
Mounts inside the back of the Power
Wave S350. Switches gas flow in the
®
Power Wave S350 through the Twist-
®
Mate™ connector. Includes gas hose and
solenoid ( only compatible with the
K2823-1 power source).
Order K2825-1
Pro-Torch™ TIG Torches
A full line of air-cooled and water-cooled torches avail-
able.
Request Lincoln publication E12.150
(See www.lincolnelectric.com)
ACCESSORIES
Hand Amptrol
Provides 25 ft. (7.6 m) of remote cur-
rent control for TIG welding. (6-pin
plug connection)
Order K963-3
Foot Amptrol
Provides 25 ft. (7.6 m) of remote
current control for TIG welding. (6-
pin plug connection).
Order K870
Arc Start Switch
May be used in place of the Foot or
Hand Amptrol
(7.6 m) cable. Attaches to the TIG
torch for convenient finger control to
start and stop the weld cycle at the
current set on the machine.
Order K814
Twist-Mate™ Torch Adapter
For connection of Pro-Torch™ TIG torches (1 piece
cable) to power sources with gas passing through the
Twist-Mate™ connection. For use with K2825-1.
Order K1622-1 For air-cooled PTA-9 or PTA-17
torches.
Order K1622-3 For air-cooled PTA-26 torches.
Order K1622-2 For water-cooled torches.
Twist-Mate™ Torch Adapter
For connection of PTA-9 or PTA-17V torches (1 piece
cable) to power sources without gas passing through
the Twist-Mate™ connection.
Order K960-1
POWER WAVE S350
®
®
®
. Comes with a 25 ft.
®
C-2