Spinning; Final Spin Speed - Miele W 5741 Operating Instructions Manual

Final spin speed

Programme
Cottons
Minimum iron
Delicates
Woollens /
Proofing
Express 20
Automatic plus
Darks and denim
Shirts
Intensive plus
Spin
Separate rinse/Starch
You can reduce the final spin speed.
However, you cannot select a final spin
speed higher than that shown in the
chart above.
Rinse and interim spin
There is a spin after the main wash and
between the rinses. A reduction in the
final spin speed will also reduce the
interim spin speed. For the programme
Cottons with a spin speed of less than
700 rpm, an additional rinse is
introduced.
To omit the final spin (Rinse hold)
^ Press the Spin speed button to
rpm
choose the Rinse hold setting. The
1400
laundry will not be spun and will
1200
remain suspended in the final rinse
600
water. This reduces creasing if the
1200 laundry is not going to be removed
from the drum immediately after the
1000
end of the programme.
1400
– To start the final spin:
1200
1200
The washing machine will display the
maximum spin speed possible. You
600
can select a lower spin speed. Start
1400
the final spin by pressing the Start/
1400
Stop button.
1400
– To end the programme:
Press the Door button. The water will
drain away. Press the Door button
again to open the door.
To omit rinse and interim spin and
the final spin (No .)
^ Press the Spin speed button to
choose the No . setting.
The water will drain away and the
machine will go straight into the anti-
crease stage.
An additional rinse is introduced for
some programmes in this setting.

Spinning

19