A ) Of Test Cycle - Electrolux with VS81 timer Service Manual

6.1.4 Operations to be carried out durong the drying phase (5
→ Functional check
Knob position
Phase
Select a drying time
and select cotton Drying
5
drying (step 49)
Turn the drying
Phase skipping and stop
timer to 0
2001.08 eb
a
) of the test cycle
→ Fault
The drying phase is skipped
The drying heater does not switch
on
Fan does not switch on
Does not dry correctly
Timer does not advance to stop
35
→ Check with machine off
Drying time switch contact faulty
Wiring faulty / interrupted
Thermostats faulty (open)
Heating element interrupted/earthed Drying heater
Timer contact G6.2-G6.6 does not
close correctly
Fan motor winding interrupted or
short-circuited; wiring
Timer contact N4.4-V7.5 does not
close correctly
Condensation solenoid valve faulty
(does not load, interrupted)
Drying timer contact faulty
→ Component to be
repaired/replaced
Drying time switch
Wiring
Thermostats
Timer
Fan motor / Wiring
Timer
Condensation solenoid valve
Drying time switch
599 34 85-05