Seat (Michigan) - Jacobsen AR3 Operation Manual

9 ADJUSTMENTS
9.8 SEAT (Michigan V5300)
The seat can be adjusted for operator's weight and
leg reach to provide a comfortable position for
operating the machine.
A. ADJUSTMENT FOR OPERATOR WEIGHT
To Adjust:
Whilst standing in front of the machine, rotate knob
(A) clockwise or anticlockwise to move the red
indicator to the approximate operator weight.
B. FORE AND AFT ADJUSTMENT
To Adjust:
The position of the adjusting lever is on the left
hand side of the seat below the seat cushion (B). By
moving the lever upwards, the seat can be slid
backwards and forwards. When in the desired
position release the lever to locate in one of the pre
set positions.
C. BACK REST ADJUSTMENT
To Adjust:
Rotate the adjuster (C) clockwise or anticlockwise
until a comfortable position is achieved.
D. ARM REST ADJUSTMENT
To Adjust:
Raise the arm rest to the vertical position and rotate
the adjustable stop to achieve a comfortable
position.
NOTE: The seat is fitted with a microswitch to
sense operator presence.
When the machine is fitted with a OPS frame or
cab a lap belt is fitted and should be worn at all
times
en-46
SAFETY, OPERATORS & MAINTENANCE MANUAL
JACOBSEN AR3